BQFDF - XUPER BRONZTEC 19868
- MSDS: BQFDF
- Manufacturer: EUTECTIC CORP
- Product Name: XUPER BRONZTEC 19868
- National Stock Number: 3439-01-078-9175
Product Identification
Product ID:XUPER BRONZTEC 19868
MSDS Date:05/01/1986
FSC:3439
NIIN:01-078-9175
MSDS Number: BQFDF
Responsible Party
FLUSHING, NY 11358-9981
US
Emergency Phone: 718-358-4000
Info Phone: 718-445-1784
Cage: 72271
Contractor
Telephone: 704-527-9800/ 800-221-1433
Cage: 72271
Ingredients
COPPER (SARA III)
CAS: 7440-50-8
RTECS: GL5325000
OSHA PEL 0.1MG/M3 FUME/1 DUST
ACGIH TLV: 0.2MG/M3 FUME; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ALUMINUM (SARA III)
CAS: 7429-90-5
RTECS: BD0330000
OSHA PEL 15MG/M3 DUST/5 FUME
ACGIH TLV: 10MG/M3 DUST; 9293
NICKEL (SARA III)
CAS: 7440-02-0
RTECS: QR5950000
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3; 9293
IRON
CAS: 7439-89-6
RTECS: NO4565500
OSHA PEL 5 MG/M3
ACGIH TLV: 10 MG/M3 AS FE2O3
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY CAUSE DIZZINESS, NAUSEA,
DRYNESS OR IRRITATION OF NOSE, THROAT, AND EYES, METALLIC TASTE,
TIGHTNESS IN CHEST, FEVER, ALLERGIC REACTIONS, METAL FUME FEVER.
CHRONIC: MAY LEAD TO SIDEROSIS AND AFFECT PULMONARY FUNCTIONS,
LUNG FIBROSIS, PNEUMOCONIOSIS, LUNG AND NASAL CANCERS. RADIATION
CAN INJURE EYES,BURN SKIN.
Explanation of Carcinogenicity:NICKEL AND ITS COMPOUNDS AND OXIDES ARE
CONSIDERED BY NTP AND IARC AS KNOWN OR PROBABLE HUMAN CARCINOGENS.
Effects of Overexposure:ACUTE: DIZZINESS, NAUSEA, DRYNESS OR IRRITATION
OF NOSE , THROAT, AND EYES, METALLIC TASTE, TIGHTNESS OF CHEST,
FEVER, ALLERGIC REACTIONS, METAL FUME FEVER, CHRONIC: SIDEROSIS,
AFFECTED PULMONARY FUNC TIONS, LUNG FIBROSIS OR PNEUMOCONIOSIS,LUNG
AND NASAL CANCERS. RADIATION CAN CAUSE EYE INJURY AND SKIN BURNS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:REMOVE TO WELL VENTILATED AREA. EMPLOY FIRST-AID TECHNIQUES
RECOMMENDED BY THE RED CROSS. GET MEDICAL ATTENTION.
Fire Fighting
Flash Point:NONFLAMMABLE
Extinguishing Media:USE MEDIA APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:NONFLAMMABLE UNDER NORMAL WORKING CONDITIONS.
USE PROCEDURES APPROPRIATE FOR SURROUNDING FIRE.
Unusual Fire/Explosion Hazard:METAL POWDER DUST MAY PRESENT A FIRE OR
EXPLOSION HAZARD UNDER FAVORABLE CONDITIONS OF PARTICLE SIZE,
DISPERSION AND STRONG IGNITION SOURCE. REFER TO AWS C2.1.
Accidental Release
Spill Release Procedures:CLEAN-UP BY VACUUMING, WET DUSTMOB, OR WET
CLEAN-UP. AVOID DUST GENERATION. USE APPROPRIATE FILTER WITH VACUUM
EQUIPMENT TO PREVENT AIRBORNE DUST LEVELS EXCEEDING PEL/TLV. IF
AIRBORNE DUST IS GENERATE D, USE AN APPROPRIATE NIOSH APPROVED
RESPIRATOR.
Neutralizing Agent:NONE.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:MAINTAIN EXPOSURE BELOW THE GIVEN PEL/TLV. USE
INDUSTRIAL HYGIENIC MONITORING TO ENSURE THAT USE OF THIS PRODUCT
DOES NOT CREATE EXPOSURE EXCEEDING THE PEL/TLV.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED RESPIRABLE FUME RESPIRATOR OR
AIR SUPPPLIED RESPIRATOR WHEN WORKING IN CONFINED SPACE OR WHERE
LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW THE
RECOMMENDED EXPOSURE LIM IT.
Ventilation:USE ENOUGH GENERAL VENTILATION AND LOCAL EXHAUST TO KEEP
THE FUMES, GASES AND DUSTS FROM THE WORKER'S BREATHING ZONE.
Protective Gloves:GLOVES TO PROTECT FROM FLAMES/RADIATION.
Eye Protection:HELMET OR FACE SHIELD WITH FILTER LENS.
Other Protective Equipment:WEAR HEAD AND BODY PROTECTION WHICH HELP TO
PREVENT INJURY FROM RADIATION AND FLAMES.
Work Hygienic Practices:WASH AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
TRAIN THE WORKER TO KEEP HIS HEAD OUT OF THE FUMES, GASES, AND DUST.
THE MINIMUM PROTECTIVE EQUIPMENT SHOULD INCLUDE GLOVES, A
PROTECTIVE FACE SHIELD, ARM PROTECTORS, APRONS, HAT, SHOULDER
PROTECTION, AS WELL AS DARK SUBSTANTIAL CLOTHING.
Chemical Properties
HCC:N1
Appearance and Odor:WELDING POWDER
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FUMES AND GASES CANNOT BE CLASSIFIED
SIMPLY. COMPOSITION OF BOTH DEPEND UPON THE MATERIAL BEING
DEPOSITED.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT.DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.